Hinged Louvre Door

2024-01-08 04:13:13

使用说明

所有模型资源均由用户上传分享，内容来源于网络公开资源
侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
模型将通过邮件发送（5分钟内自动发送），感谢理解带宽压力，超过1小时没收到，请联系我们

关于费用

我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！

扫码手机访问

抖音私信 @jobsfan

Summary

Add a door with louvres and hinges to your diorama or gaming table.

Each object is modelled 1-in-10 scale. Rescale the model to suit your application. A door handle is also included - its position is indicated by a small hole. Use the plain door frame to add detail to the other side of the door opening.

Door variants and matching frames are provided with a range of hinge pin diameters (A, B or C). Select whichever best suits your needs. Use suitable pivot pins, such as steel rod, nails, wire or filament. Carefully use a suitably-sized drill bit (or reamer) to clean out the hinge holes.

Print with the objects parallel with the print bed. For filament printers, use at least 20% infill, brim and no supports.

Clean-up, prime, paint and decorate your door as required. If required, make skirting boards to match.