自对齐硬币冲压机用于制作硬币戒指

Self Centering Coin Punch for Coin Ring Making

2024-01-08 07:04:56

使用说明

所有模型资源均由用户上传分享，内容来源于网络公开资源
侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
模型将通过邮件发送（5分钟内自动发送），感谢理解带宽压力，超过1小时没收到，请联系我们

关于费用

我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！

扫码手机访问

抖音私信 @jobsfan

Summary

Tool hold for your self centering coin ring punch that is avaiable on Amazon. There is a spot specifically for the self centering coin hold tool, each punch and each die for the punches. I over sized the holes for the tooling by 1/16" to allow for tooling varations and filment variations.

I printed mine with pretty basic settings for PLA in Cura. Followed the temps on the roll, and had it print pretty quick, like 130mm/s I think. I did 40% infill just cause I wanted the tool holders stiffer so that I could pick one up and carry it in one hand without worry of it bowing and something falling out of it's place.

The URL to the tools themselves.
https://www.amazon.com/Centering-Punch-Spacers-Needed-Sizes/dp/B07XRV4488/

The STL file and the Sketchup should be included in the package.