金属盘角保护装置
Metal Pan Corner Protector
使用说明
- 所有模型资源均由用户上传分享，内容来源于网络公开资源
- 侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
- 模型将通过邮件发送（5分钟内自动发送），感谢理解带宽压力，超过1小时没收到，请联系我们
关于费用
我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！
扫码手机访问
抖音私信 @jobsfan
Summary
This is my first design. It's a very basic one that I may improve on in the future. It should be printed in TPU or a flexi material. I'm not sure if there are other models of this up, I just thought it would be an easy first design.
What's it for!? I have a clothes washer upstairs with a metal pan under it in case there's a leak. Unfortunately there's a sharp metal edge that could hurt your foot. These are the same type of pans they put under hot water heaters and AC units so you could probably use it for that as well.
Print Settings
- Printer brand:
Creality
- Printer:
CR-10S
- Rafts:No
- Supports:No
- Resolution:.2
- Infill:100%
- Filament brand:
Inland
- Filament color:
Translucent Blue
- Filament material:
TPU
- Notes:
Printed on my new CR-10 SE with Inland Translucent Blue TPU
Temp - 220c
Bed - 50c
Speed - Varies, but around 40mm/s. Print slower due to the thin wall
No Supports
No raft or brim in my case, but a brim may help.
Post-Printing
Tags
License
Metal Pan Corner Protector
by teamhex is licensed under the Creative Commons - Attribution license.
相关内容
联系我们
热门推荐
-
Na Miata 240SX 原厂经典车型 + 后灯装饰插件2023-05-10 -
WaS_UK_N-class_destroyer2023-05-17 -
Schildkröte Line Tank2023-08-08 -
头发修剪架2024-01-10 -
Smallrig F40 跟踪焦点齿轮2024-04-23
最热下载
-
Glock 17/34 Solidworks 模型文件2023-04-21 -
Extra 330LX型RC飞机翼固定架（Multiplex）2023-05-23 -
数字世界12342024-01-03 -
佳能EOS镜头连接接口2024-01-11 -
FPV遥控纸飞机（机身）STL 3D模型2025-09-16
最新模型
-
Flick 19E（增强型） - 可使用的玩具枪 - 类似弹弓的橡皮筋枪2025-08-21 -
FLsun SR HGX Bambu直接驱动挤出机2025-07-18 -
系带3D凉鞋（儿童款）2025-07-16 -
巴黎卢浮宫的三圣母像2025-07-16 -
坏龙家的大宝贝女生别下2025-06-26