墙面挂钩胶带安装

wall hooks tape mounted

2024-01-08 09:58:39

使用说明

所有模型资源均由用户上传分享，内容来源于网络公开资源
侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
模型将通过邮件发送（5分钟内自动发送），感谢理解带宽压力，超过1小时没收到，请联系我们

关于费用

我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！

扫码手机访问

抖音私信 @jobsfan

Summary

this is a mount i made to hold up a small tarp over my desk because i didnt want to risk damaging the suppporting beams that are holding up the roof

it was made to work with any tape under 50mm in width

i have not weight tested this but like i said it can hold up a 4ft by 6ft tarp and seems strong

it was made to work with pla by having the print resting on the tape vs the tape sticking to the print as pla and tape dont mix well

the measurements in the photos are in mm

Print Settings

Printer brand:
Creality
Printer:
CR-10S
Rafts:
Doesn't Matter
Supports:
Yes
Resolution:
.2500
Infill:
30% but what ever works
Filament brand:
doesn't matter
Filament color:
doesn't matter
Filament material:
i used pla but abs or petg would be stronger
Notes:
for walls i used 4 but i am sure less would work

墙面挂钩胶带安装

朋友，你觉得上面这个模型，属于下面的哪个分类？

上面没有我要的选项

必须全中文，且长度不超过15

相关内容

猜你喜欢

联系我们

邮箱: 289047960@qq.com

热门推荐

TopSolar 100W 太阳能板支撑架
2023-05-03
奥古斯塔黄色锁一代适配器参数化模型
2023-05-13
Ferrari 458 Italia 3D模型
2024-01-07
300毫升Marinelli型号试管，适用于Radex Obsidian
2024-04-04
Lian Li O11 Vision LCD Holder Sensor Panel
2024-04-07

最热下载

全能3D打印机测试
2023-03-26
通用型1/10比例底盘 - DKS基础款
2023-03-26
Hein Gericke 摩托车骑行服 Hiprotec 系统用的按扣（替换件）
2024-04-03
安益卡通 i3 迷你 HGX 轻量挤出器
2024-04-21
厨房水槽滤网过滤器
2025-06-05

最新模型