RCBS塔式炮弹药捕捉装置

RCBS Turret Press Primer Catcher

2024-01-08 10:42:04

使用说明

所有模型资源均由用户上传分享，内容来源于网络公开资源
侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
模型将通过邮件发送（5分钟内自动发货），感谢理解带宽压力

关于费用

我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！

扫码手机访问

抖音私信 @jobsfan

Summary

For all 2A enthusiasts that have this reloading press.

While RCBS has some high quality reloading tools and materials, the primer catcher for the RCBS Turret Press is not one of those, and leaves something to be desired. The primer catcher that comes with the turret press occasionally splits in two parts, falls out of the holes that hold it in place, or fails to catch the spent primers. It is very flimsy, and is generally the weakest part of this reloading press.

While there are 3D models for primer catchers for other reloading presses, I noticed that there are no free versions for the RCBS Turret Press.

This model does not require you to buy extra components from a local hardware store, however you do need screws to secure it to the press. The RCBS Turret Press manual states that the screws are 8-32 x 1/2 screws.

This model comes in two parts: the primer catcher itself, and the tube that snugly fits to the end of the primer catcher, that holds the spent primers. The tube is curved so it does not interfere with the movement of the press handle and so you can manipulate it whatever direction suits your set-up the best. The tube will hold a few hundred spent primers. Once it becomes full, just slide it off, dump the spent primers in the trash, and slide it back on.

I have printed this for my own use, and I am currently using it without any issues. This was my first 3d print, so let me know if you encounter any problems. I will post pictures of the actual primer catcher on my turret press soon.