ESP32 GPS追踪装置 | 车辆追踪系统设计 | 外壳模型

ESP32 GPS Tracking Device | Vehicle Tracking System | Enclosure design

2023-03-26 17:30:07

使用说明

所有模型资源均由用户上传分享，内容来源于网络公开资源
侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
模型将通过邮件发送（5分钟内自动发送），感谢理解带宽压力，超过1小时没收到，请联系我们

关于费用

我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！

扫码手机访问

抖音私信 @jobsfan

视频:- https://youtu.be/qWlSAB67FZU

This enclosure is designed for a GPS tracking system using ESP32 PCB. You can use this device as a portable or fixed mount somewhere. The enclosure design is compatible with waterproofing (IP 64) so you can mount this outside. We used M2 screws for the component and M3 screws with rubber washers for the covers. You can use M5 - M6 screws for the wall mount, but we recommend M6 screws.

Enclosure size (X, Y, Z):- 74mm x 83mm x 29mm

Part List:-

ESP32 devkit v1 Board
Ublox NEO6M GPS Module with antenna
SIM800L GSM Module with antenna
2G SIM Card (standard size)
Battery 18650 3.7v 2000mAh with battery holder.
https://www.tme.eu/en/details/bhc-18650-1p/batteries-holders/comf/

电子和编程信息:-
https://youtu.be/Lrwbu9oA3Do

We are not responsible for this project's electronic design and programming. So please test the project before starting 3d printing.
Please follow the part list photo/PDF for the fitting components.
If there is any issue with the enclosure. Please contact us. I'm happy to help you.

ESP32 GPS追踪装置 | 车辆追踪系统设计 | 外壳模型

朋友，你觉得上面这个模型，属于下面的哪个分类？