Tubular WideX 'box' 4英寸 - 高质量牙签模型 - 可3D打印的框架

Tubular WideX "box" 4inch - HD toothpick - 3d-printable frame

2024-01-08 19:26:15

使用说明

所有模型资源均由用户上传分享，内容来源于网络公开资源
侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
模型将通过邮件发送（5分钟内自动发货），感谢理解带宽压力

关于费用

我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！

扫码手机访问

抖音私信 @jobsfan

Tubular WideX 'box' 4英寸 - 高质量牙签模型 - 可3D打印的框架

Summary

This is the 4" WideX "box" version of the Tubular frame. This is the strongest design yet and will be able to take a beating. All electronics are mounted on a cage part which itself is mounted to the core frame by zip ties.
Apart from higher sturdiness, this also helps when you crash hard and damage the core frame. You can then just remove a few zip ties and screws, and switch to a new core frame rather easily.
This is a more advances tubular frame. If this is your first go at one, I personally suggest the TrueX-version first - it's the most easiest to build.

I have 5 designs currently available:

Deadcat - for long-range (+ new subtype "box-style")

WideX - for Freestyle (+ new subtype "box-style")

TrueX - for Racing

More information can be found here on my website.

If you plan on building one or would like to get more info, there is a Discord server dedicated to this frame class. You'll get all the support you need there. I'll do what i can to help.

https://discord.gg/ZBEmBTNHAc

The weight of the frame itself as in the picture is around 81grams.

Print instructions

Best printed with a material that's resistant to impact force - I personally have used PA-CF in the past, lately switched to PLA+ or PLA Meta though which has been working fine as well. Normal PLA is too brittle and weakens in the sun.

Always print each part "flat", so none of the hole is pointing directly up (as a 3d-print usually is weakest along the layer lines) - even though it's counter-intuitive.

After printing, you need to drill out the holes using a 8mm and 6mm drill.

Building instructions

Mainly about cutting the rods

I added the rod lengths in a separate picture. Make sure to cut them wearing a mask in a well ventilated space (I use a dremel outside, hand saw is better as it creates less carbon dusk - but is more of a hazzle).

One suggestion: Make the inner rods shorter than in the picture by 1mm. I found this makes assembly a little bit easier and not hurt stability too much, as drilling out the holes never goes 100%.

Will make a video soon about this type of frames.

Regarding the rods:

I'm using these: https://aliexpress.com/item/4000407024494.html

You will need:

1 x 8x6mm

1 x 6x4mm

If you source them elsewhere: Twilled rods as in the above link are always better and more robust, but pulltruded ones also work (even cheaper). For this size, in my opinion pulltruded is perfectly fine (and a frame costs around 3€).