维卡尔气象传感器磁吸支架

ViCare Climate Sensor magnetic mount

2024-01-08 21:37:02

使用说明

所有模型资源均由用户上传分享，内容来源于网络公开资源
侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
模型将通过邮件发送（5分钟内自动发送），感谢理解带宽压力

关于费用

我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！

扫码手机访问

抖音私信 @jobsfan

Summary

This is a screwless mount for a Viessmann Climate Sensor. The sensor is operated with a button cell, so there is no wired power connection. The holder fits the Gira E2 switch range.

Components:

1 Cap -> Gira 026803 (Blindabdeckung mit Tragring weiß)
1 Frame -> Gira 021129 (Rahmen E2 weiß)
12 neodym-magnets (10x2 mm)

The magnets are attached to the two printed parts with superglue. Finally, a cover plate is glued to the front.

The magnets are very strong and the attachment works well. In my setup, the magnetic field has no influence on the electrical function of the sensor.

!!! ATTENTION !!! In my case, the knob which the sensor is clipped to the mount has broken off once. I would recommend using an infill modifier at 100% at this point or printing the entire part solid !!!