帕克赛德电池 - 焊接工具Quicko T12-942

Parkside battery - soldering Quicko T12-942

2024-01-09 00:05:33

使用说明

所有模型资源均由用户上传分享，内容来源于网络公开资源
侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
模型将通过邮件发送（5分钟内自动发货），感谢理解带宽压力

关于费用

我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！

扫码手机访问

抖音私信 @jobsfan

Summary

Here I made a custom soldering station holder for the Quicko T12-942 on a Parkside tool 20V Liion battery.

Print Settings

Printer brand:
Artillery
Printer:
Artillery Hornet
Resolution:
0.2
Infill:
15
Filament brand:
azure film
Filament color:
black, red
Filament material:
PETG
Notes:
Printed in two parts, lower part black, upper red.

Post-Printing

Assembling

The two parts are held together with three screws that were available from other device cannibalization, I prefered mechanically holding together the two parts, probably the two part can be glued if you prefer that with some two component adhesive. (you can use three small wood screws or other that will be suitable)
The two part solution gives me the possibility to print multiple lower parts for other projects and I can customize the upper part, plus I can more easily lay it on the print bed.

For the battery contact I used copper male auto connector terminals that are press fitted into the lower part, they will fit nicely, you can use heat if necessary when inserting if to tight or melted silicone if to loose.

Initially I intended to fix the soldering station to the plastic holder with the lower two screws that hold the front or back panel but after printing the soldering iron was sitting perfectly in the holder that it's not needed to fix it with screws.

帕克赛德电池 - 焊接工具Quicko T12-942

朋友，你觉得上面这个模型，属于下面的哪个分类？