Jumpguard反向外角设计

Jumpguard reverse/outer corner

2024-01-09 00:34:46

使用说明

所有模型资源均由用户上传分享，内容来源于网络公开资源
侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
模型将通过邮件发送（5分钟内自动发送），感谢理解带宽压力，超过1小时没收到，请联系我们

关于费用

我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！

扫码手机访问

抖音私信 @jobsfan

Summary

This is the outer corner for the D-D Jumpguard. Helps as the kit did not come with enough and I needed to complete my mesh lid before I could order/receive them from the store. Printing them was much more rewarding and cheaper.

This is a remix of https://www.thingiverse.com/thing:4083777 as I needed the outer corner I modified that user's design to fit my needs.

Print Settings

Printer brand:
Creality
Printer:
Ender-3 v2
Rafts:
Doesn't Matter
Supports:
Yes
Resolution:
0.2
Infill:
30
Filament brand:
overture
Filament color:
Doesn't Matter
Filament material:
PETG
Notes:
This is designed to print face up and with supports.

I use a raft as it helps with adhesion but is not required. I have yet to print with organic supports as SuperSlicer does not support that function, unlike PrusaSlicer.