EIBOS 管道持有器

EIBOS Tube Holder

2024-01-09 02:46:27

使用说明

所有模型资源均由用户上传分享，内容来源于网络公开资源
侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
模型将通过邮件发送（5分钟内自动发货），感谢理解带宽压力

关于费用

我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！

扫码手机访问

抖音私信 @jobsfan

Summary

I bought an EIBOS dryer Box and noticed that the feeding interfered with the print.
If you got the same problem and too cheap to buy skateboard bearings or just don´t hava any around, this a thig for you!
The second best thing to a roller with a bearing is this low friction (hence PTFE tubing).

The PTFE tubing should be with the Eibos and fitts length wise perfektly like in the picture..

The holder is held down by a nut and bolt combination that comes with the printer (probably for the light I didn´t have/bought).

I tried it out, seems to be working just fine on my printer.

This should hold on any other 20mm V-slot aluminum extrusion. Therefore most similar printers.

Print Settings

Printer brand:
Creality
Printer:
Ender-3 S1
Rafts:
Doesn't Matter
Supports:
Yes
Filament brand:
geeetech
Filament color:
black
Filament material:
PETG
Notes:
I included following file types:

If you want to remix or adapt something:
f3d -> Fusion 360
ipt -> Inventor

For printing:
STEP -> gives a way better render, (than .stl) cause of math ;)
Works with most common slicer-programs.

If you must:
STL

Tags

3d printer autodesk inventor Dryer Eibos Ender Ender 3 ender 3 s1 fusion 360 holder Inventor PETG STEP stl

License

CC BY-NC-SA

EIBOS Tube Holder
by Uhr01 is licensed under the Creative Commons - Attribution - Non-Commercial - Share Alike license.

EIBOS 管道持有器

朋友，你觉得上面这个模型，属于下面的哪个分类？

上面没有我要的选项

必须全中文，且长度不超过15

相关内容

猜你喜欢

联系我们

邮箱: 289047960@qq.com

最新模型

最热下载