窗户与挂钩盒

Window and Pelmet Box

2024-01-09 03:29:58

使用说明

所有模型资源均由用户上传分享，内容来源于网络公开资源
侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
模型将通过邮件发送（5分钟内自动发送），感谢理解带宽压力，超过1小时没收到，请联系我们

关于费用

我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！

扫码手机访问

抖音私信 @jobsfan

Summary

Include a window and pelmet box in your diorama. Two versions of the window are provided. The items are scaled at 1-in-10 or 10%. I printed mine at 13% (i.e. STL scaled by 130%).

Print in the default orientation and scale as required. Supports are not required, print with about 20-25% infill. Print two window frames; two window surround; and one pelmet box.

Clean up and paint. Sandwich window material (i.e. thin polycarbonate sheet) in between both window frames and install in your window opening. Attach the window surrounds to the window opening. Attach the pelmet box above the window surround. Make some curtains and attach inside the pelmet box with a suitably sized dowel, rod or wire.