虚拟男孩展示台

Virtual Boy Display Stand

2024-01-09 05:26:20

使用说明

所有模型资源均由用户上传分享，内容来源于网络公开资源
侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
模型将通过邮件发送（5分钟内自动发货），感谢理解带宽压力

关于费用

我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！

扫码手机访问

抖音私信 @jobsfan

Summary

Elevate your Virtual Boy console to new heights with this sleek and minimalistic 3D printed display stand. Drawing inspiration from iMac stands, this design is tailored to enhance the aesthetics of your retrofuturistic VR headset.

The stand comprises two main parts:

Clamp Attachment: The initial segment is a secure clamp meticulously crafted to grasp the Virtual Boy's stand adapter. This ensures a heightened level of stability for an impressive display.

Display Stand: The second component is the stand itself, seamlessly interlocking with the clamp attachment. Together, they create an elevated platform, providing a sophisticated showcase for your Virtual Boy.

This stand is purposefully designed for display purposes rather than gameplay.

Print Settings

Printer brand:
Zortrax
Printer:
M200
Rafts:
Yes
Supports:
Yes
Resolution:
0.29
Infill:
100%
Filament brand:
Polymaker
Filament color:
Black
Filament material:
ABS
Notes:
General

It is recommended to print all the parts with 100% infill since the Virtual Boy is quite heavy and requires sturdy support.

Clamp Adapter (A)

The clamp adapter (A) should be printed flat so that the layers are parallel to the Virtual Boy for enhanced strength.

Stand (B)

The stand (B) is provided as a single-piece file or as three parts that assemble into one. In either case, print it sideways to ensure that, once assembled, the layers are perpendicular to the ground, enhancing its strength.

Avoid using support material in the key ridges of the two halves of the stand (B1 and B2), where the interlocking key (B3) goes. Adding support may complicate its removal.

Two alternate STL files are provided for the stand, B1 Wide and B2 Wide. Each has 2 mm more in width where the two halves meet compared to the original halves of the stand (B1 and B2). This is to facilitate sanding in case of warping.