独立式碎片展示台

Free Standing Frag Table

2024-04-17 00:31:48

使用说明

所有模型资源均由用户上传分享，内容来源于网络公开资源
侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
模型将通过邮件发送（5分钟内自动发送），感谢理解带宽压力，超过1小时没收到，请联系我们

关于费用

我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！

扫码手机访问

抖音私信 @jobsfan

Summary

These are sold everywhere for an absolutely obnoxious price. Do not be part of the problem. See , and be part of the solution. You can also stop purchasing 30-40 dollar skimmer stands. I used live rock, but these would have also worked awesome and cost maybe $1 plastic. How I print them is with 6969 walls, so it all sinks. No one is here to stop me, and it works well for what I am trying to accomplish. dont make things more complicated than they need to be.

as for printing it, you can switch layers and make some siiiiiiick looking tables. california filament translucent is the best quality and glow I have found yet. I will sit there and change colors from yellow, green, orange, turquoise (you will love this plastic), about 700 times the first 9 layers, every 2-3 minutes. (i usually make it 3 or 4 layers before it just finishes printing whatever color is on when i got distracted. but what it does is way cooler than Bambu's 1200 printer that makes dogs with white eyeballs. i dont want white eyeball dogs in my fish tank. you can do this with any printer. any printer that you can pull plastic out and push plastic into.

beware: for month 5-8 when i learned this , i destroyed three printers completely to the point they are now spare parts somewhere in my closet. there is an art to it. you will learn it, and be fine. but dont do it on a 1200 bambu printer or its your fault for buying it in the first place.

scale the legs to whatever you want. if you want them to slide all the way into the table, then scale them to 97% and get your super glue out. otherwise they will snap in and out and use the grooves of your layer lines to lock in place enough you wont need to mess with but can still remove , clean, blah blah everything you want to do . i think you can figure out how to scale it down, and get the legs to match. but be careful if you get too small you will then have to use D3DPT frag plugs which fit into very small holes , and hurt way worse than a Lego when you step on them;)