热控系列罐式加热器底座

Heaterbloc Jar Heater Base

2024-01-09 10:32:49

使用说明

所有模型资源均由用户上传分享，内容来源于网络公开资源
侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
模型将通过邮件发送（5分钟内自动发送），感谢理解带宽压力，超过1小时没收到，请联系我们

关于费用

我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！

扫码手机访问

抖音私信 @jobsfan

Summary

Updated 3d-printed base for mason jar heaters according to the original Heaterbloc design. The "b" versions have screw/nail holes in the center, and the "trimmed" lack the extra brim and warnings.

These bases have a wider diameter than DarrenHumphrey's bases, according to the original 16" circumference spec, which makes them suitable for the original design with 6" pots, and less prone to tipping.

I've also added some basic warning labels to the brim. I recommend printing the first 1mm (5 layers at 0.2mm layer height, 4 layers at 0.28) in a contrasting color to make the text more legible. This can be done by inserting an M0 "Stop" into the Gcode after those layers to change filaments then resume the print.

Instructions to build the heaters can be found here:
https://t.co/t9VyjUpEzB