伙伴型加热器丙烷管盖口出口（露营车）

Buddy Heater Propane Hose Hood Outlet (camper van)

2024-03-31 09:14:51

使用说明

所有模型资源均由用户上传分享，内容来源于网络公开资源
侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
模型将通过邮件发送（5分钟内自动发送），感谢理解带宽压力，超过1小时没收到，请联系我们

关于费用

我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！

扫码手机访问

抖音私信 @jobsfan

Summary

This is used to pipe a small propane hose of 1.5" or less into your camper van so you can run a buddy heater. You need to install a propane bottle mount on the outside of your van. So you don't explode! Then run the hose inside to the heater. This thing I designed stops rain from entering your van while piping the hose inside. The hardware is for M4 screws and nuts. The propane hose hood captivates the nuts for easy install. Use butyl tape and caulking to install it under and around the screws. Works good! I used PLA+ for extra rigidity. Won't snap easy like normal PLA. love this stuff.

Use some TPU and design yourself a nice grommet to fit your hole and hose then place my propane hood over it and you are all set.

Enjoy!
-Casey