Hasselblad 滑动鞋适配器（用于 Keks）

Hasselblad slide shoe adapter for Keks

2024-01-09 11:47:14

使用说明

所有模型资源均由用户上传分享，内容来源于网络公开资源
侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
模型将通过邮件发送（5分钟内自动发送），感谢理解带宽压力，超过1小时没收到，请联系我们

关于费用

我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！

扫码手机访问

抖音私信 @jobsfan

Summary

I picked up a Keks light meter that comes with three cold shoe width options. I also have another camera that I am going to use it on whose cole shoe is metal, so that set the width of the cold shoe to the 18mm wide option.

The connection to the Hassy was a little tight on my printer so I opened up those dimensions a fraction (thanks to Light_Leaks_Lab for the original STL!), narrowed the cole shoe connection and added a stop at the front to eliminate having the light meter fall out the front.

Print this vertically with the cold shoe stop on your bed and you will need no supports. I used 20% infill but increased the perimeters to 3 so it's fairly stong for such a small piece.

Print Settings

Printer brand:
Prusa
Printer:
MINI+
Rafts:
No
Supports:
No
Resolution:
0.1
Infill:
20
Filament brand:
Inland
Filament color:
Black
Filament material:
PETG
Notes:
Print vertically with the cold shoe stop on the bed and you will need no supports.