Giant Snowman - Plain Head
2024-01-09 12:32:07
使用说明
- 所有模型资源均由用户上传分享，内容来源于网络公开资源
- 侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
- 模型将通过邮件发送（5分钟内自动发送），感谢理解带宽压力，超过1小时没收到，请联系我们
关于费用
我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！
扫码手机访问
抖音私信 @jobsfan
Summary
Plain Head for Giant Snowman Fidget.
Printing
-All parts can be printed without supports.
Assembly
- Cut a length of TPU that is about 150cm.
- Fold the TPU in half and tie a knot 50cm down from the fold. This will create a 100cm loop with two loose ends that are 25cm each.
- Thread the TPU loop through the snowman head.
- Pull both ends of the TPU through the scarf and middle section.
- Pull the looped end of the TPU through one of the holes in the snowman base. Secure it with a tension cap.
- Pull the other end of the TPU through the opposite hole in the snowman base. Pull the TPU tight until the knot comes through the hole. Secure this end of the TPU with another tension cap.
- Push remaining TPU into the snowman base where it can be pulled out later for disassembly.
Can I sell copies of this?
Yes! This project was shared under the Creative Commons - Attribution license.
This license allows selling copies, but you must provide proper attribution, as detailed in the license itself.
Please note that any other projects linked here (remixes or related projects) may have a different license. Please respect those licenses.
Tags
朋友，你觉得上面这个模型，属于下面的哪个分类？
必须全中文，且长度不超过15
相关内容
联系我们
邮箱: 289047960@qq.com
热门推荐
-
超酷植物剪辑模型2023-03-26 -
Guitar Slider and Pick Holder 3D Model2023-04-03 -
BMW F650GS 燃油泵专用扳手2023-05-11 -
花园浇水 3V设计2023-05-14 -
经典版 Omnitrix V22023-05-15
最热下载
-
通用型1/10比例底盘 - DKS基础款2023-03-26 -
Glock 17/34 Solidworks 模型文件2023-04-21 -
GMX曲线支架支持GoPro安装（或轻型结构）2023-05-22 -
E3D火山喷嘴2023-05-26 -
Hein Gericke 摩托车骑行服 Hiprotec 系统用的按扣（替换件）2024-04-03
最新模型
-
罗技K400键盘壁挂式支架2025-07-27 -
网眼透风拖凉鞋赤足鞋凉鞋2025-07-18 -
系带3D凉鞋（儿童款）2025-07-16 -
Yeezy Foam Runner Adidas运动鞋2025-07-16 -
天使和恶魔2025-07-16