Giant T-rex head, split for printing

2024-04-04 03:09:07

使用说明

所有模型资源均由用户上传分享，内容来源于网络公开资源
侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
模型将通过邮件发送（5分钟内自动发送），感谢理解带宽压力，超过1小时没收到，请联系我们

关于费用

我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！

扫码手机访问

抖音私信 @jobsfan

Summary

I'm friends with the people down at the corner pizza joint, and they used to have a paper banner advertising their carnivore challenge: Eat an entire 16" carnivore pizza by yourself and get a free tee-shirt, and the pizza is free.

I printed a little t-rex head from UWCharlie1983's model as a gift for the manager, and she went so nuts over it that i decided to see if i could make a big one.

This was broken into pieces and put together on a first-gen ender3 with an ender extender400XL kit, and a crtouch ABL setup.

I broke it into pieces using tinkercad, and printed the pieces and superglued it. Even with an 0.8 nozzle @ 50mm/sec, each piece took anywhere from 12-25 hours to print. All in PLA and PLA+ from microcenter.

The pieces were then superglued together, and rubberbanded to maintain pressure. The head was then gifted to the manager, and she tracked down a professional artist to do a KILLER paintjob.

Thanks again for the original model, UWCharlie1983!