1英寸PVC管件部件用于展示架

1-Inch PVC pipe parts for a display stand

2024-01-09 13:16:02

使用说明

所有模型资源均由用户上传分享，内容来源于网络公开资源
侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
模型将通过邮件发送（5分钟内自动发货），感谢理解带宽压力

关于费用

我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！

扫码手机访问

抖音私信 @jobsfan

Summary

This is a collection of parts for making various PVC structures. Included are corners, tees, cross joints, along with vertical supporting joints (as shown in the pictures). The PVC parts are, by design, all the same length, or ½ the length. The key to the design is to allow the structure to be assembled and disassembled and easily stored. Latches are used to hold the parts together.

The following parts need to be purchased.

a) 1/4 Inch Wire Lock Pin 4 Inch Long Trailer Coupler.
This is needed to hold the “Support_End” together. If you don’t use this part, then don’t purchase it.
b) Spring Loaded Toggle Latch Stainless Steel.
A photo of the dimensions of this part is included. It should be easy to find this on Amazon.
c) M3x6mm Thread Button Head Hex Socket Cap Screw Bolt
d) M3 Hexagon Hex Nut
e) 1-inch PVC pipe (SC40)
f) Hot Blue Glue PVC Cement

Print Settings

Printer brand:
VoronDesign
Printer:
Voron Trident 350
Rafts:
No
Supports:
No
Resolution:
.4mm
Infill:
15
Filament brand:
ATARAXIA ART
Filament color:
Black
Filament material:
PETG
Notes:
I recommend printing in PETG with 4 walls and at least a 15% infill. Only the “Support_End” parts need support, the rest of the parts can be printed without supports.

I printed this with a RatRig V-Core 3 printer, 400 - its not listed as a printer.