阿米加米恩威尔 RT-50B 电源箱

Amiga Mean Well RT-50B Power Supply Case

2024-01-09 20:52:22

使用说明

所有模型资源均由用户上传分享，内容来源于网络公开资源
侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
模型将通过邮件发送（5分钟内自动发货），感谢理解带宽压力

关于费用

我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！

扫码手机访问

抖音私信 @jobsfan

Summary

This case will fit a Mean Well RT-50B power supply based on the same design as my PT-45B/PT-65B version. Both the cable entry points are on the same side of the PSU making it a bit neater when sat on top of a desk.

Power switch used measures 19.5x13mm. It should be easy to find one that fits, just a search for rocker switch and check the cut-out requirements).

For the cable strain reliefs, the ones I used can usually be found on eBay/AliExpress (6.5mm inner hole size). You can see the one I used in the photos.

All the screw holes are countersunk so can be printed without supports.

Needs 4x M3 screws for the case (I used 8mm but the length here isn't too important), and 2x M3 x 6mm screws to mount the PSU. (NOTE: Be careful on what length screws you use to mount the PSU. If they are too long, they will hit the PCB inside the PSU).

Step files are also available. If you modify them into anything useful, please add them as a remix for others to use.