Nail Dip粉盒
Nail Dip Powder Tray
使用说明
- 所有模型资源均由用户上传分享，内容来源于网络公开资源
- 侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
- 模型将通过邮件发送（5分钟内自动发货），感谢理解带宽压力
关于费用
我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！
扫码手机访问
抖音私信 @jobsfan
Summary
Needed a mess free way for my daughter to do her nails. I found a few online that just were not structurally sound or impossible to print. This was the first one that was decent, but the meshes were not connected. Fixed them and it works great now.
I made the tray tab a little thicker because it would snap if you looked at it wrong.
Print Settings
- Printer brand:
Creality
- Printer:
Ender 3 Pro
- Rafts:No
- Supports:No
- Resolution:0.20
- Infill:25%
- Filament brand:
Creality
- Filament material:
PLA
- Notes:
I printed the tray standing straight up. This made the bowl shape a lot smoother and didn't require any supports. May wanted to print a brim to help keep it up right.
The base I printed with the hollow side facing up.
Post-Printing
Sanding Trays
You may need to sand the tiny edges on the trays to get them to fit just right in the base. They are thin, so be careful not to get carried away.
License
Nail Dip Powder Tray
by shiver_mi_timbers is licensed under the Creative Commons - Attribution license.
相关内容
联系我们
最新模型
-
玛莉德2024-05-08 -
50公斤重量传感器支架2024-05-08 -
莫洛托夫标记笔3D模型2024-05-06 -
侧边挂钩VW Cabriolet2024-05-06
最热下载
-
Gyro Air旋转空气模型2023-03-26 -
Falcon 9三维模型2023-03-26 -
罗宾：不公正22024-04-07 -
法兰尺寸测量工具（小）2024-04-19
