Nail Polish Rack 参数化架子

Nail Polish Rack (Parametric)

2024-01-08 05:52:51

使用说明

所有模型资源均由用户上传分享，内容来源于网络公开资源
侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
模型将通过邮件发送（5分钟内自动发送），感谢理解带宽压力，超过1小时没收到，请联系我们

关于费用

我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！

扫码手机访问

抖音私信 @jobsfan

Summary

A little rack/stand for nail polish bottles, I designed in FreeCAD
The model is parametric. The number of levels is fixed, but they can be tweaked:

Parameter	Current Value	Unit	Comment
Pocket Depth	40	mm	How deep are the levels
Pocket Height	40	mm	Distance between the floors of the levels
Wall Thickness	3	mm	Thickness of all walls
Slant Angle	10	degree	The angle of the floors
Curb Height	10	mm	Height of the front wall of each level
Width	181	mm	Overall width of the model

Changing a parameter sometimes breaks the sketch for the side wall, because the recompute causes two of the lines to cross. This can be changed manually by deleting some of the constraints, fixing the lines and placing new constraints. Not sure if this is a bug in FreeCAD or I am doing it wrong.

Print Settings

Rafts:
Doesn't Matter
Supports:
Yes
Resolution:
0.2
Infill:
100%
Filament brand:
rast3d
Filament material:
PLA
Notes:
Printed on QIDI X-Plus3.
I printed it with 3mm wall, but now I realize it might be an overkill, so I've attached an STL with 2mm as well.
The 3mm model took 432 grams of filament to print in around 13-14h.

The 2mm model reduces the required filament to 287 grams and the print time to around 10h.