Anycubic Kobra 2 Neo 滚筒存放架

Anycubic Kobra 2 Neo Spool Holder

2024-01-10 10:47:11

使用说明

所有模型资源均由用户上传分享，内容来源于网络公开资源
侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
模型将通过邮件发送（5分钟内自动发货），感谢理解带宽压力

关于费用

我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！

扫码手机访问

抖音私信 @jobsfan

Summary

This is a spool holder designed for the Anycubic Kobra 2 Neo using the 2 threaded inserts at the top of the printer and the twist-in spool post that comes with the printer. These inserts are 30-31mm apart and are perfect for this type of design! This design is loosely based on https://www.thingiverse.com/thing:6359735 for the mounting, but the rest is my own design. The "tighter fit" part has 0.2 mm less clearance on the spool post hole, because the original printed a bit loose for me. I printed this in white, but I assume most would want to print this in black to match. I haven't tested it yet, but this should use 2 M4 10mm screws. The 3rd file is an untested part with better hole alignment and the tighter fit.

Print Settings

Printer brand:
Anycubic
Printer:
Kobra 2
Rafts:
No
Supports:
No
Resolution:
.3
Infill:
25%
Filament brand:
Anycubic
Filament material:
PLA
Notes:
Supports are needed for the 2 nibs in the spool post hole, but not for the 2 bolt holes. I used the paint on supports feature in prusa slicer for those.