BDN9大型打字板升高支撑架

Raised Stand for BDN9 Macropad

2024-01-10 16:56:12

使用说明

所有模型资源均由用户上传分享，内容来源于网络公开资源
侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
模型将通过邮件发送（5分钟内自动发送），感谢理解带宽压力，超过1小时没收到，请联系我们

关于费用

我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！

扫码手机访问

抖音私信 @jobsfan

Summary

This print replaces the bottom of the BDN9 macro pad from Keebio with a 45 degree angled bottom for a more "stream-deck-like" experience. I printed using PLA but anything should work. This design is compatible with both rev1 and rev2 of the BDN9.

You can find print files for the middle layer and more here.

There are built in cutouts for anti-slip feet which I highly recommend to prevent slipping when the bottom buttons are pressed. The holes are 6mm diameter and .5mm depth, I used these feet from amazon.

This is my first model designed for 3d printing and there is definitely room for improvement in the design. I may upload an updated version with smoother corners and some cable management.