浸灭瓶盖3D模型
Quench Bottle Cap
2024-01-10 20:16:33
使用说明
- 所有模型资源均由用户上传分享,内容来源于网络公开资源
- 侵权投诉:通过抖音私信 @jobsfan 联系我们(需附版权证明),24小时内处理
- 模型将通过邮件发送(5分钟内自动发货),感谢理解带宽压力
关于费用
我们是爱好者共建社区,为维持服务器成本,每个模型收取微量费用(仅覆盖基础开支)。我们承诺最低成本运营,感谢您的支持!
扫码手机访问
抖音私信 @jobsfanSummary
This is my 1st ever submission based on a Fusion 360 design. It's the inner plastic for a Quench 1L water bottle (it may work on others)
Print Settings
- Printer brand:
Creality
- Printer:
K1
- Rafts:No
- Supports:Yes
- Resolution:0.2mm
- Infill:15%
- Filament brand:
Creality
- Filament color:
Black
- Filament material:
PLA
- Notes:
Printed in fast mode
Custom Section
Final notes
The seal is not exactly tight, but it is good enough for my uses. Will get a bigger o-ring when next at a hardware store.
I took the foam from the old lid inner and inserted that into the print to maintain the thermal performance (this needs to be tested)
WARNING: PLA melts at a relatively low temp, so don't use PLA if you plan on putting hot water in the container
Tags
朋友,你觉得上面这个模型,属于下面的哪个分类?
必须全中文,且长度不超过15
相关内容
猜你喜欢
联系我们
邮箱: 289047960@qq.com
热门推荐
-
聚集体脊椎身体:巨型昆虫兽2023-05-23
-
迪森球吸尘器电缆挂钩2024-03-27
-
微软MSX梯度专家GBS-8220案例2024-04-04
-
固定点平衡2024-04-07
-
乒乓球无气2024-04-22
最热下载
-
通用型1/10比例底盘 - DKS基础款2023-03-26
-
Dado - 立方体模型2024-03-24
-
空客操纵杆配备控制杆固定装置2024-03-30
-
Woods Mower 30922 护盾保持者2024-04-24
-
泰坦电视核心升级2024-05-02
最新模型
-
手电筒支架2024-05-08
-
Nema 23 GSX-20 型号2024-05-08
-
Shift Collar Boot Support - 可调节领口靴子支撑2024-05-06
-
SD卡与USB设备支架2024-05-06
-
智能座椅滑动设计2024-05-06