Enders 3 V2 Neo Z轴和Y轴电缆链固定装置
Ender 3 V2 Neo Z-axis and Y-axis cable chain mount
使用说明
- 所有模型资源均由用户上传分享，内容来源于网络公开资源
- 侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
- 模型将通过邮件发送（5分钟内自动发送），感谢理解带宽压力，超过1小时没收到，请联系我们
关于费用
我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！
扫码手机访问
抖音私信 @jobsfan
Summary
This is a remix of a remix.
On my Ender 3 v2 Neo, the cable chain thing attached to the bed came at a strange angle and was misaligned with the original plate mounting point. The whole chain was hovering slight to the right (viewed from the back of the printer) causing strain on the Y-axis cable. Also the v-slot prongs where a little bit loose for my liking.
The changes from 4sens design https://www.thingiverse.com/thing:4961808 are as follow:
Moved Y-axis chain mount about 5 mm to the right (viewed from the back of the printer)
Added just a little more space between V-slot prongs for even tighter fit on the base frame
Thickened the whole base plate by 2 mm (was 2 now is 4)
Added a fillet on the spots, where the cables are touching the plate so there is no rubbing against hard edge (just in case )
The end of the plate is now flush with the side aluminum profile of the base :)
You can print the sample to check for your frame fitment.
Print Settings
- Printer brand:
Creality
- Printer:
Ender-3 V2 Neo
- Rafts:Yes
- Supports:No
- Infill:30
- Filament brand:
Fiberlogy
- Filament material:
PCTG
- Notes:
I recommend using a small raft, just in case, since the part is a bit tall
Tags
License
Ender 3 V2 Neo Z-axis and Y-axis cable chain mount
by MrSerios is licensed under the GNU - GPL license.
相关内容
猜你喜欢
联系我们
热门推荐
-
Wled控制器箱2023-08-25 -
空气软枪缓冲管板 (AEG, 后置连接木制部件)2024-01-03 -
Arduino继电器模块外壳2024-01-14 -
Smallrig F40 跟踪焦点齿轮2024-04-23
最热下载
-
奥瑞图尔 Obsidian - Marlin 固件 PID 打印床解锁2023-03-26 -
车身RC 1/10 全套2023-03-26 -
3D打印圣诞树模型2023-03-26 -
MK47 模组道具枪2023-03-26 -
Halo Reach巴黎级大型战舰2024-05-05
最新模型
-
3d打印全向自行车（部分金属在文件里面包含CAD图纸）2025-07-25 -
任意立方体活动关节的一体打印外星人2025-07-19 -
龙珠孙悟空，无需支撑2025-07-19 -
鞋撑2025-07-17 -
真实玩偶 / 镶有凸圆形玻璃参数的眼睛2025-07-15