Tough Credit Card Holder v2 + Money Clip (with gadsden snake and plain option)

2024-01-11 13:13:55

使用说明

所有模型资源均由用户上传分享，内容来源于网络公开资源
侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
模型将通过邮件发送（5分钟内自动发送），感谢理解带宽压力，超过1小时没收到，请联系我们

关于费用

我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！

扫码手机访问

抖音私信 @jobsfan

Tough Credit Card Holder v2 + Money Clip (with gadsden snake and plain option)

Summary

I need a solid card holder, easy to choose a card, secure, and less moving parts for durability. So I remixed scaryPug's design.

The locking mechanism inspired by the Dango M1 slider. It can hold 9 cards without the front plate, and 7 cards with the front plate. You can scale the LR_center_v2.stl parts up to accommodate more cards. The v2 version has enlargened holes so you'll have less trouble with M3 screws

Front plate's function is to hold the latch in open position when you slide it halfway, so you can spread the the cards easily.

For the screw, you'll need 10mm M3 X 8 and M3 nuts x 8. The front parts now are thinner and has wider wells on it so you wont have trouble with attaching nuts.

Optional one sided RFID blocker plate is included.

As a decorative, one Gadsden snake logo part and one plain part you can remix for yourself is included. Just make sure you print them and LR_front_v2.stl with 0.2mm nozzles, since theyre too small and well detailed.

Also now the front clip has an integrated money clip. Please do not print that with support interfaces otherwise it becomes quite hard to remove.
The rest can be printed with the usual 0.4mm nozzles.