德威特坚固箱体分隔系统
DeWalt Tough Case System divider
使用说明
- 所有模型资源均由用户上传分享，内容来源于网络公开资源
- 侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
- 模型将通过邮件发送（5分钟内自动发送），感谢理解带宽压力，超过1小时没收到，请联系我们
关于费用
我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！
扫码手机访问
抖音私信 @jobsfan
Summary
For Dewalt Tough Case System - Large and Small.
Medium ones are not as high. I believe that Mini ones are also lower but I don't have one to check. But if you need something for a double height to increase your storage - this divider becomes handy :)
Please note that on the Large Case - it doesn't fit in all places - especially around the TStak connectors.
I've managed to print like 10 at a time in upright position without any brims or rafts - just going slower on the first few layers.
Have fun :)
Print Settings
- Printer brand:
Creality
- Printer:
Ender-3 V3 SE
- Rafts:No
- Supports:No
- Resolution:0.2
- Infill:5-15
Tags
License
DeWalt Tough Case System divider
by AronBee is licensed under the Creative Commons - Attribution - Non-Commercial - Share Alike license.
相关内容
联系我们
热门推荐
-
SnapMaker J1驾驶舱扩展3D模型2023-04-05 -
Na Miata 240SX 原厂经典车型 + 后灯装饰插件2023-05-10 -
Dew Shield for Evoguide 50ED2023-08-07 -
JBL Partybox 310 3D脚垫橡胶脚侧用型号2023-09-09
最热下载
-
3D打印圣诞树模型2023-03-26 -
MK47 模组道具枪2023-03-26 -
GPD Win3 把手型号2023-04-07 -
Dell显示器VESA接口安装适配器2023-06-17
最新模型
-
Flick 19E（增强型） - 可使用的玩具枪 - 类似弹弓的橡皮筋枪2025-08-21 -
丰田22RE发动机Starer电机2025-08-08 -
性感美女3d人像（带基座）2025-07-17 -
系带3D凉鞋（儿童款）2025-07-16 -
私密羞羞娱乐骰子2025-07-15