光线步枪 - 星际前哨

ArcLight Pistol - Star Citizen

2024-01-11 23:39:43

使用说明

所有模型资源均由用户上传分享，内容来源于网络公开资源
侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
模型将通过邮件发送（5分钟内自动发货），感谢理解带宽压力

关于费用

我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！

扫码手机访问

抖音私信 @jobsfan

Summary

Info

This is my take on Star Citizen's ArcLight Energy Pistol.
I got the file from the game files and put a lot of effort in making it viable to use in 3D printing.
There is a tutorial somewhere how to do it, but if you have questions just send me a message (preferable on reddit see down below)

Putting it together

I designed a mechanism for the trigger so it can be moved. It holds in place with springs.
Thats also the reason i didnt wanted to glue it together and put screw holes in it.
I used a thread cutter for the holes so the screws dont need a seperate thread and can hold inside the PLA itself.

Parts

If you also want to screw it together without modifying it, you need the following screws:
In Germany they are called
M4x10mm - 1x (3.5mm in diameter, 10mm shaft and 7mm head diameter)
M4x16mm - 3x (3.5mm in diameter, 16mm shaft and 7mm head diameter)

For the trigger to be hold in place you need two pressure springs:
5mm x 20mm - 2x (5mm thick and 2cm long)

Blender Files

I put the blend files here aswell but in it the model is 1000x smaller than it should be. I didnt want to resize it because it broke some boolean operations while i tested it.

Questions?

If you have questions you can write me here or preferable over on reddit

3D Print of ArcLight Pistol Executive with working trigger on a K&W stand
by u/mjTekk in starcitizen

Print Settings

Printer brand:
Bambulabs
Printer:
Bambu P1S
Rafts:
No
Supports:
Yes
Resolution:
0.2mm layer height
Infill:
15%
Filament brand:
ERYONE
Filament color:
black, dark grey, gold
Filament material:
PLA
Notes:
For the supports i used the tree variant.
I put some support blocker on the top of the print, because there would be supports generated which you cant remove later.