Command Strip磁吸式挂钩

Command Strip Magnetic Holder for Remotes, Phones, and More

2024-01-12 02:18:44

使用说明

所有模型资源均由用户上传分享，内容来源于网络公开资源
侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
模型将通过邮件发送（5分钟内自动发货），感谢理解带宽压力

关于费用

我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！

扫码手机访问

抖音私信 @jobsfan

Summary

I was looking for a way to hang some remotes and didn't want to use a lot of filament so I designed a quick to print hanger for 3M Command Strips. It worked so well on the remotes that I braved hanging an old smart phone and it works great.

Print 2! They are mirror images so you'll need to print a pair.

Orientation is important. There is a small ledge that keeps heavier items from falling. On the wall side it goes on the bottom and on the remote side it should be at the top. If you get it backwards, the item may not be held securely. Falls can damage your items.

I used some neodymium magnets I had lying around. They measure 3 mm by 6 mm diameter. I use a dab of glue and small mallet to encourage them into the snug fitting holes. Depending on the weight of the item you can use 2 to 6 magnets. When in doubt, use 6.

After printing insert the magnets. One near the ledge will match one furthest from the ledge on the other half. Mount with Command Strips. I place the mount away from the end I hold the remote from and it doesn't interfere with normal operation.

Happy printing and let me know if you enjoy or find additional uses.