墙壁安装式头盔架 使用3米大型粘钩带
Wall mounted Helmet Holder using large 3m command strips
使用说明
- 所有模型资源均由用户上传分享，内容来源于网络公开资源
- 侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
- 模型将通过邮件发送（5分钟内自动发货），感谢理解带宽压力
关于费用
我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！
扫码手机访问
抖音私信 @jobsfan
Summary
Couldn't find a helmet holder that wasn't bulky or one that didn't put pressure on the foam that touches your head.
I designed this holder to put the pressure just above neck foam as that part doesn't touch your head so it shouldn't matter if that foam flattens eventually.
Living in a rented unit I also designed it to use two large Command strips to be make it removable.
Here is the link to the design if you want to add screw holes or something. Or if I get enough requests I can add screw holes to the design.
https://www.tinkercad.com/things/epyjNc6OAGg-helmet-holder-w-3m?sharecode=IZR3bFZaCwiVfV2TJFQ3p5mTiJdThHNzu8nW8thL8Cc
Designed to print without supports, printed fine on my Ender 3 v2.
Tags
License
Wall mounted Helmet Holder using large 3m command strips
by Evo_Spec is licensed under the Creative Commons - Attribution - Non-Commercial license.
相关内容
联系我们
最新模型
-
塑料扣（3D打印无需支撑设计）2024-05-08 -
RC拖车模型 1:10 比例 扭力臂长版2024-05-08 -
劳拉的基础模型2024-05-08 -
宜家 手把导向器2024-05-08 -
雨滴罩密封夹具套装（针对Scirocco MK1）2024-05-06
最热下载
-
东方风格机械关节龙3D模型2023-03-26 -
远投笼2024-04-06 -
超越IPD板2024-05-03 -
塑料扣（3D打印无需支撑设计）2024-05-08
