Meta Quest 3控制器带子3D模型

Meta Quest 3 controller straps

2024-01-12 03:29:51

使用说明

所有模型资源均由用户上传分享，内容来源于网络公开资源
侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
模型将通过邮件发送（5分钟内自动发送），感谢理解带宽压力，超过1小时没收到，请联系我们

关于费用

我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！

扫码手机访问

抖音私信 @jobsfan

Summary

I wanted a simple and clean design for my controller strap and unfortunately non of the designs i tried so far were sturdy enough and all of them broke sooner rather than later, so i attempted to make my own.
This is a strap plate for the Meta Quest 3 controllers, remixed from Chri's 3D scans.
It is a pretty tight fit, i suggest that you use a more flexible than brittle material. The right is just a mirrored image of the left.
On the included image, you can see how to wrap the stock strap around the loop.
It looks to me, that it does not obstruct the IR lights on the controller, on a short trial run I had no issues with the tracking.
Bear in mind, that you may need to post process it a bit, just to clean it up.
I can't emphasize it enough, it is a tight fit, it has to be in order to stay in place during a play session, but it also has it's downsides. It's hard to put on and take off in order to change the batteries.