Meta Quest 3控制器仿真固定架
Meta Quest 3 Controller Sim Rig Mount
使用说明
- 所有模型资源均由用户上传分享，内容来源于网络公开资源
- 侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
- 模型将通过邮件发送（5分钟内自动发送），感谢理解带宽压力，超过1小时没收到，请联系我们
关于费用
我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！
扫码手机访问
抖音私信 @jobsfan
Summary
This is a mount/holder for a Quest 3 controller to be held on an aluminium profile rig.
When sim racing in VR, there was nowhere to store the controllers after being used to load a game. I remixed this as an option to store the controllers on a rig when not in use.
The holder is meant to be mounted on a horizontal beam parallel to the 8mm slot in the profile.
This is is remix of a remix.
Print Settings
- Printer brand:
Anet
- Printer:
A8
- Rafts:No
- Supports:No
- Resolution:0.3
- Infill:20%
- Filament brand:
eSun
- Filament color:
Black
- Filament material:
PLA+
- Notes:
Hot end temp 210C
Bed temp 60CI used 3 bottom/top layers for a bit more strength.
Gyroid infill pattern (this is the strongest infill pattern according to my research)Printed upright. The hooked arms came out a bit distorted on my old printer without supports but they seem sturdy enough to work.
How I Designed This
I used Tinkercad to enlarge the two mount holes to 9mm and recess the openings.
Tags
相关内容
猜你喜欢
联系我们
热门推荐
-
丰田Corolla AE86座椅倾斜手柄2023-05-12 -
Diatone Roma L5 天线支架（小型安装孔）2023-08-05 -
玻璃中的时钟2023-08-24 -
GoPro 镜头盖及容器2024-01-14 -
牛奶盒2024-05-08
最热下载
-
奥迪奥技术卡 ATH-M40x 连轴器2024-03-23 -
Dado - 立方体模型2024-03-24 -
花环戒指2024-05-08 -
Flick 19E（增强型） - 可使用的玩具枪 - 类似弹弓的橡皮筋枪2025-08-21
最新模型
-
网眼透风拖凉鞋赤足鞋凉鞋2025-07-18 -
艺术雕像（女性）2025-07-16 -
1:10比例汽车排气管模型2024-05-06 -
sourceone v5 HGLRC M100 5883 支架2024-05-06 -
A Simple Jumping Spider Perch 3D模型2024-05-06