简约卡扣式挂钩重新诠释
Simple Carabiner Reimagined
使用说明
- 所有模型资源均由用户上传分享，内容来源于网络公开资源
- 侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
- 模型将通过邮件发送（5分钟内自动发货），感谢理解带宽压力
关于费用
我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！
扫码手机访问
抖音私信 @jobsfan
<<<>>>
Inspired by https://www.thingiverse.com/thing:2565902. 这个定制设计使用了相同的中心弹簧门式风格。门上的弹簧被薄化，以允许更大的门偏转，由重新设计的钩子框架原因。
nThe Simple Carabiner that this was based on was a brilliant design. My sole purpose for the redesign was to gain more clip over clearance. The 50% version can now clip over a 13mm round object and the full size can clip over a 1 inch object. The gate and frame were also modified for better gate retention under load.
The .STL files are available for full size as well as 80%, 60%, and 50%.
nYou can of course just download the full size carabiner and gate and then scale them in the slicer to get your desired size. You may not get good results below 50% without using less than a .4mm nozzle.
For best results, print with the following wall thicknesses:
Carabiner= 8 walls thick (IMPORTANT FOR SOLID SPRING BELOW SLOT)
n80%= 6 walls or 2.4mm
n60%= 5 walls or 2.0mm
n50%= 4 walls or 1.6mm
Gate= 10 walls thick (IMPORTANT FOR SOLID CENTER SPRING)
n80% gate= 8 walls or 3.2mm
n60% gate= 6 walls or 2.4mm
n50% gate= 5 walls or 2.0mm
Printing with less than these wall thicknesses may result in fatigue cracking of the springs.
3 top and bottom layers work great.
The approximate sizes are:
n100%= 107mm or 4.2 inches
n80%= 86mm or 3.4 inches
n60%= 64mm or 2.5 inches
n50%= 54mm or 2.1 inches
Update 5/27/22
nI uploaded a slightly curvier version of the simple carabiner in case someone likes the ear shape better.
Carab.stl is the straight frame version
nCarab2.stl is the curvier version
There is little difference except:
1) There is a slightly larger radius at both the top and bottom of the frame to better fit large round objects like broomsticks or shower rods, etc.
2) There is a slightly greater angle at the top of the frame to ensure that the clipped over object slides up close to the back spine for greater strength rather than getting stuck by the gate where the carabiner is weaker.
The original straight frame carabiner works great for clipping over belt loops or wide backpack loops because the top is flatter and a little closer to horizontal. They both clip over approximately a 1 inch round object when printed full size.
Update: The carabiner's functionality has been slightly improved, making it more secure and durable.
简约卡扣式挂钩重新诠释相关内容
联系我们
最新模型
-
安尼卡比奇猎食者巴姆布拉伯 X1型号热端2024-05-08 -
PS4轻型版桌下挂架2024-05-08 -
欢迎来到罗克维尔2024标志项链2024-05-06 -
可重复使用的1kg线轴2024-05-06 -
茶几腿2024-05-06
最热下载
-
预组装的百合花盒子2023-03-26 -
3D打印斯特林发动机型号Alpha2023-03-26 -
原始控制舱2024-03-25
