Singer针织机脚部3D模型

Singer Sewing Machine feet

2024-01-12 09:38:56

使用说明

所有模型资源均由用户上传分享，内容来源于网络公开资源
侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
模型将通过邮件发送（5分钟内自动发送），感谢理解带宽压力，超过1小时没收到，请联系我们

关于费用

我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！

扫码手机访问

抖音私信 @jobsfan

Summary

I have an old Singer Graduate 6705 sewing machine. It has 4 screws on the bottom that once had rubber feet--all but one of those is long gone, and the one that remains is chewed into a nubbin.

So I designed and printed some new ones. I used Solutech flexible filament, which is pretty rubbery. I'm not sure how well these would work in PLA--I'd think they'd be too brittle to assemble and too hard to be useful.

To get them on the old screws, I just put the screw head down on the smaller end of the foot and gave it a firm tap with a hammer--the ring is flexible enough to fit around it and snap into place (though I couldn't get them in by hand).

That said, I'm including the scad file, so you can futz with the sizes on your own if you need to!