Singer重型缝纫机4452式滴胶头

Singer Heavy Duty Sewing Machine 4452 Bobbin

2024-01-17 07:41:16

使用说明

所有模型资源均由用户上传分享，内容来源于网络公开资源
侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
模型将通过邮件发送（5分钟内自动发送），感谢理解带宽压力，超过1小时没收到，请联系我们

关于费用

我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！

扫码手机访问

抖音私信 @jobsfan

Summary

This is a re-model from the original file https://www.thingiverse.com/thing:2402210 via customizer to suit my Singer Heavy Duty 4452 Sewing Machine Bobbin. I edited the file further in Tinkercad to add in the holes. As per the original design, it snaps together - although you could use a little super glue if you wanted to, I have not had to. As per pics it fits in the bobbin case and on the automatic bobbin winder as per my original one and more importantly works.

Print Settings

Printer brand:
Creality
Printer:
Ender 3
Rafts:
No
Supports:
No
Resolution:
Standard Cura Profile
Infill:
99
Filament brand:
Mech Solutions
Filament color:
White
Filament material:
PLA +
Notes:
Printed file takes around 23 minutes, they are printed together with a skirt. No need for a brim. Amazon are selling a pack of 12 for 10.88 CAD, given it costs me 0.09c to print one (materials and electricity cost included) and I need 150 of them for all my thread, it was a no brainer and cheaper for me. Kudos to Elliot from the original file.

Note in customiser, if using Elliots original file, ensure that you increase wall thickness AND factor in increasing the hole diameter if you have an automatic bobbin winder.

And of course, if you can print this cheaper and quicker than what I am capable of now - all the better.