低多边形赫卡忒
Low-Poly Hecate
使用说明
- 所有模型资源均由用户上传分享，内容来源于网络公开资源
- 侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
- 模型将通过邮件发送（5分钟内自动发货），感谢理解带宽压力
关于费用
我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！
扫码手机访问
抖音私信 @jobsfan
Summary
I made a low poly version of the scan of Hecate Triformis of the Rijksmuseum van Oudheden in Leiden, The Netherlands.
This is a modern Hekataion, a three-bodied depiction of the goddess around a pillar. Hecate (pronounced eh-kuh-tee) is the goddess of crossroads, night, magic/sorcery, ghosts, and the knowledge of herbs.
The model prints well without supports, although you'll need to go slow. This was printed with a 0.12mm layer height. I did a little drybrushing of purple and red on the model to bring out the facets.
The base has the Sator Square, which was filled after printing with a little acrylic paint thickened with baking soda.
Print Settings
- Printer brand:
FlashForge
- Printer:
Creator Pro
- Rafts:No
- Supports:Doesn't Matter
- Resolution:0.12 mm
- Infill:33%
- Filament brand:
eSun
- Filament color:
Black
- Filament material:
PLA
Tags
License
Low-Poly Hecate
by hecate3 is licensed under the Creative Commons - Attribution - Non-Commercial license.
相关内容
联系我们
最新模型
-
锅盖收纳锅盖放置挂钩-能防止12cm到32cm尺寸的锅盖2025-06-24 -
3D木托盘模型2024-05-08 -
Grogu Baby Yoda 曲奇造型模具 + 附带曼多人形曲奇模具及配方！2024-05-08 -
Quadlock 桌下手机固定器2024-05-06 -
用于排水渠道的格栅（80毫米）2024-05-06
最热下载
-
红眼鳄鱼蜥蜴可拼合骨架3D模型2023-03-26 -
3D机器人手臂模型2023-03-26 -
小型四足机器人 - 优化第九代伺服系统2023-03-26 -
小鸡绘画机（Eggbot衍生版）v1.12023-03-26 -
超越IPD板2024-05-03