3D模型：Ender 5 - MGN12H轨道支架（用于MicroSwiss DirectDrive挤出机）

Ender 5 - MGN12H Rail Mount for MicroSwiss DirectDrive Extruder

2024-01-12 18:34:03

使用说明

所有模型资源均由用户上传分享，内容来源于网络公开资源
侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
模型将通过邮件发送（5分钟内自动发送），感谢理解带宽压力，超过1小时没收到，请联系我们

关于费用

我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！

扫码手机访问

抖音私信 @jobsfan

3D模型：Ender 5 - MGN12H轨道支架（用于MicroSwiss DirectDrive挤出机）

Summary

This is technically not a remix of the original part as I remodeled it from zero, but I strongly followed the design of the original part :)

I have the MicroSwiss DirectDrive + AllMetalHotend assembly for V-Rollers and wanted to use it with linear rails.

Modifications:

Added 3rd Screw Mounting Point
The upper two bolts M3 and M5 screw into the aluminum thread of the Extruder
The lower screw screws into the material of the mount using an M5 Bolt
Made clearance for the smooth z-rod when homing
Added a nose for a better mating area with the X-Axis homing switch (depends on where you mount the switch)
Widened the mount such, that you can slide it onto the rail from the side without unmounting the whole rail

Additional materials needed:
5x M3 Bolt (4 for MGN12H Carriage and 1 for Extruder)
2x M5 Bolt (for Extruder - M5 Screws can be salvaged from the V-Roller Bearings)

Print Settings

Printer brand:
Creality
Printer:
Ender 5
Rafts:
No
Supports:
No
Resolution:
0.25mm
Infill:
70%
Filament brand:
DuraPro
Filament color:
Black
Filament material:
ASA
Notes:
Should print well with PETG or ABS/ASA.
Consider using ABS/ASA if you have a heated chamber,

Post-Printing

To ease mounting, screw the M5 Bolt once into the part before assembly, this will self-tap the hole.
Note: Don't screw it in and out too fast as friction could melt the material :)