Walkie Talkie摇篮型基座设计
Walkie Talkie cradle/base
使用说明
- 所有模型资源均由用户上传分享，内容来源于网络公开资源
- 侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
- 模型将通过邮件发送（5分钟内自动发送），感谢理解带宽压力，超过1小时没收到，请联系我们
关于费用
我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！
扫码手机访问
抖音私信 @jobsfan
Summary
I got my son a pair of walkie talkies last week. He wanted a cradle so they don't wander everywhere.
We sat down and browsed for inspiration. He found nothing that met his taste.
He was clear the devices should be enclosed to a certain height and I've measured them so the slot they slide into is a perfect match. Also the spacing between the 2 devices had to be exactly as commanded.
Lastly, he didn't want them standing up straight, but they must have a 30 degree angle. So I modelled a triangle shape and a support to prevent it from falling over.
Total time modelling: 30 minutes!
Prints as one piece without supports.
The Walkie Talkies are the cheap ones from a Dutch discounter.
Print Settings
- Printer brand:
Artillery
- Printer:
Artillery Sidewinder X2
- Rafts:No
- Supports:No
- Resolution:0.2
- Infill:20%
- Filament brand:
Spectrum
- Filament color:
Caribbean blue
- Filament material:
pla
- Notes:
I've printed this with some leftover pla. Weighs about 85g.
Tags
License
Walkie Talkie cradle/base
byPlasticsmelteris licensed under theCreative Commons - Attribution - Non-Commercial - Share Alikelicense.
相关内容
联系我们
热门推荐
-
1954年梅赛德斯-奔驰W196皮诺德比赛车壳体2023-03-26 -
3D数据可视化模型2023-05-13 -
蛇形 4014602023-05-13 -
Raspberry Pi 保护外壳2023-05-14 -
最终派系平躺标识牌支撑2024-03-17
最热下载
-
通用型1/10比例底盘 - DKS基础款2023-03-26 -
Metabo SXE450 真空连接器（适用于Bosch Advanced VAC20）2024-01-11 -
Apple鼠标 - M0100 3D模型2024-03-25 -
GLOCK 17（第三代）蓝枪2024-04-13 -
厨房水槽滤网过滤器2025-06-05
最新模型
-
模块化笔筒链2025-07-19 -
hgx挤出机头火炮响尾蛇 X3 SWX3 HGX lite 2.002025-07-18 -
鞋撑2025-07-17 -
鞋带锁2025-07-17 -
Yeezy Foam Runner Adidas运动鞋2025-07-16