Voile Speed Pivot Tower Bushings

2024-01-13 00:36:16

使用说明

所有模型资源均由用户上传分享，内容来源于网络公开资源
侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
模型将通过邮件发送（5分钟内自动发送），感谢理解带宽压力，超过1小时没收到，请联系我们

关于费用

我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！

扫码手机访问

抖音私信 @jobsfan

Summary

These are my attempt at the 'Replacement Tower Bushings for Speed Pivot (Legacy)' parts. I had one break and a replacement wouldn't arrive in time before a great snow storm. They are a close enough match that the binding will still interface with them. I took them out on one tour during the last big snow storm and they survived.

I printed with the binding pin hole facing upwards.

Print Settings

Printer brand:
Prusa
Printer:
i3 MK2.5
Rafts:
No
Supports:
No
Infill:
100
Filament brand:
Ovarture
Filament material:
PLA
Notes:
The 'Common' part may also work for Voile speed rails, but I can not confirm as my setup uses the Speed Pivot.

I printed these using PLA at 100% infill. ASA or ABS may be a better option but I don't have an enclosure yet.