Dartboard 360度 LED 环形灯光
Dartboard 360 LED Ring Light
使用说明
- 所有模型资源均由用户上传分享，内容来源于网络公开资源
- 侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
- 模型将通过邮件发送（5分钟内自动发送），感谢理解带宽压力，超过1小时没收到，请联系我们
关于费用
我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！
扫码手机访问
抖音私信 @jobsfan
Summary
This 3D-printable LED ring light design is aimed at providing consistent lighting without casting shadows on your dartboard. It attaches to your dartboard surround, so it is easy to install and doesn't require drilling or specific mounting points.
--- 360-Degree Shadow-Free Lighting
--- Parametric Design
--- Easy Printing, Installation and Assembly
Assembly Instructions:
1, Measure your dartboard surround and adjust the parameters in Fusion 360 (See picture).
2, (Optional) Adjust ring_tolerance parameter to until the Ring and Connector parts fit tightly. Otherwise, you can leave it as default and use superglue in the connections.
3, Parts for printing:
- 4x Holder.stl
- 11x Ring.stl
- 1x RingCable.stl
- 8x Connector.stl
4, Assemble the prints and glue the LED strip into the ring. Start the LED strip at the RingCable part in order to have outlet for the power cables.
Print Settings
- Printer brand:
Anycubic
- Printer:
i3 Mega
- Rafts:No
- Supports:No
- Resolution:0.3
- Infill:25
- Filament brand:
Creality
- Filament material:
PLA
Tags
相关内容
联系我们
热门推荐
-
Raspberry Pi外壳2023-03-27 -
SnapMaker J1驾驶舱扩展3D模型2023-04-05 -
Schildkröte Line Tank2023-08-08 -
头发修剪架2024-01-10 -
Arduino继电器模块外壳2024-01-14
最热下载
-
奥瑞图尔 Obsidian - Marlin 固件 PID 打印床解锁2023-03-26 -
Makita 10.8V 钻具与电池组2023-04-07 -
Extra 330LX型RC飞机翼固定架（Multiplex）2023-05-23 -
安益卡通 i3 迷你 HGX 轻量挤出器2024-04-21 -
FPV遥控纸飞机（机身）STL 3D模型2025-09-16
最新模型
-
Myuto Flick 19X - 可工作的玩具枪（橡皮筋弹弓状枪）2025-08-17 -
适用于Raspberry Pi5的多功能适配器外壳2025-07-27 -
罗技K400键盘壁挂式支架2025-07-27 -
FLsun SR HGX Bambu直接驱动挤出机2025-07-18 -
Yeezy Foam Runner Adidas运动鞋2025-07-16