3dsjs

S形 Savonius 球体设计

S-shaped Savonius ball beared

2023-03-26 17:45:46

使用说明

  1. 所有模型资源均由用户上传分享,内容来源于网络公开资源
  2. 侵权投诉:通过抖音私信 @jobsfan 联系我们(需附版权证明),24小时内处理
  3. 模型将通过邮件发送(5分钟内自动发货),感谢理解带宽压力
关于费用

我们是爱好者共建社区,为维持服务器成本,每个模型收取微量费用(仅覆盖基础开支)。我们承诺最低成本运营,感谢您的支持!

扫码手机访问
抖音私信 @jobsfan

The special feature is that the blades are aerodynamically s-shaped, similar to the Ugrinsky turbine.
This is the so-called 'three-blade fish-ridge turbine'. It is also being studied as a water turbine.
You can find more details at
https://www.researchgate.net/figure/The-supposed-streamline-of-the-Fish-ridged-rotor_fig1_295084185

https://vawt.ro/2016/02/28/fish-ridged-savonius/

https://youtu.be/gqllBK2su34

In order to be able to exchange all parts at any time, I designed everything to be screwable.
For the axle I took 8 mm round aluminium material and cut a thread M8 on one end.

My print settings
bearing: extrusion width 0.5 mm, layer height 0.25, perimeters 3, infill 40%, 3 bottom/top layers
plate bracket: extrusion width 0.5 mm, layer height 0.25, perimeters 4, infill 30%, 4 bottom/top layers
bottom and top plate: extrusion width 0.5 mm, layer height 0.25, perimeters 2, infill 30%, 4 bottom/top layers
blade: extrusion width 0.53 mm, layer height 0.25, perimeters 1, infill 0%, no bottom/top layers
threaded bushes M3: extrusion width 0.4 mm, layer height 0.2, perimeters 1, infill 0%, 2 bottom/top layers
spacer: extrusion width 0.5 mm, layer height 0.25, perimeters 1, infill 0%, 2 bottom/top layers

S形 Savonius 球体设计
朋友,你觉得上面这个模型,属于下面的哪个分类?
必须全中文,且长度不超过15