瓦里亚 V.S. 三号电源砖背包

Varia VS3 Power Brick Backpack

2024-01-13 04:15:08

使用说明

所有模型资源均由用户上传分享，内容来源于网络公开资源
侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
模型将通过邮件发送（5分钟内自动发送），感谢理解带宽压力，超过1小时没收到，请联系我们

关于费用

我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！

扫码手机访问

抖音私信 @jobsfan

Summary

The Varia VS3 coffee grinder comes with an external power supply brick. As this brick can be annoying I designed a solution in form of this backpack.
This print is snapped onto the grinder's back and the actual power brick is slid in from the top side. Wires can be stripped to the backpack as well optionally to gain even more tidiness in the kitchen.

Printing
I printed the backpack without supports with active fan cooling and very little artifacts. The fit is (in my opinion) perfect and not to tight for the Varia, but a little tight for the power brick to grab it safely. As the contact area to the print bed is small I would recommend using brims, a raft or 3dlac spary.

Print Settings

Printer brand:
AnkerMake
Printer:
AnkerMake M5
Rafts:
No
Supports:
No
Resolution:
0.2mm
Infill:
20%
Filament brand:
Amazon Basic
Filament color:
Black
Filament material:
PLA
Notes:
Brim 7mm
Top/Bottom: 4 Layers
Walls: 3
Print time has been 3.5h with 75% Ankermake/Bambulab speeds. For 'classic' printers with ~50mm/s speed around 8h print time is estimated.

PrusaSlicer popped a warning about thin walls. I ignored it and the print came out pretty well.