圣诞节山羊轮廓图形集第一部分

CHRISTMAS REINDEER SILHOUETTE SET 1 OF 3

2024-01-13 05:26:09

使用说明

所有模型资源均由用户上传分享，内容来源于网络公开资源
侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
模型将通过邮件发送（5分钟内自动发送），感谢理解带宽压力，超过1小时没收到，请联系我们

关于费用

我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！

扫码手机访问

抖音私信 @jobsfan

Summary

The reindeer silhouette's have 3 designs, these are a recreation of a design sold on a international web store. To avoid copyright laws these are for personal use only and not for resale they are a replication.
Size could be scaled down, however I have not tried scaling but imagine they would be fine down to 50%, please be mindful of thickness and adjust back to 15mm thickness if scale is changed.
I have not made any mount holes as just used 3 pieces blue tac to hang as light weight

Approx sizes

27cm x 32cm x 15mm
21cm x 32cm x 15mm
19cm x 32cm x 15mm

Print Settings

Rafts:
No
Supports:
No
Notes:
I printed with pla but sure abs and others are fine.
I had printed with a fine setting and slowed the speed slightly.
I think infill should by basic standard setting, the lighter it is the easier to mount on wall.

Size could be scaled down, however I have not tried scaling but imagine they would be fine down to 50%, please be mindful of thickness and adjust back to 15mm thickness if scale is changed.
I have not made any mount holes as just used 3 pieces blue tac to hang as light weight.
Had these on the wall for Christmas but it doesn't have to be seasonal, you could leave up permanently(out of direct sun if pla)
Would look nice with 3 tone filament.