无支撑手机架

Supportless Phone Stand

2024-01-14 00:42:00

使用说明

所有模型资源均由用户上传分享，内容来源于网络公开资源
侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
模型将通过邮件发送（5分钟内自动发送），感谢理解带宽压力，超过1小时没收到，请联系我们

关于费用

我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！

扫码手机访问

抖音私信 @jobsfan

Summary

Why you need a Phone Stand

Hands-Free Convenience: A phone stand allows you to use your device without having to hold it, freeing up your hands for other tasks. Whether you're watching videos, attending virtual meetings, or following a recipe, a phone stand provides a hands-free experience.
Charging Friendly: Sometimes it gets annoying to hold your phone while charging. Phone stands usually allow you to comfortably charge your phone while it sits on the stand.
Bedside Standby: Your can leave the stand on your bedside table next to your charger. This is the most convenient spot to put your phone while you sleep. I even own multiple of these in the bedroom, bathroom, kitchen, desk etc. So I have a stand everywhere I need it.
Last Minute Present: Do you need a good, cheap, last minute present? Then, this is the ideal option. During the Christmas season, I just print a bunch of these to give to friends and family and it basically costs nothing.

Why you need this Phone Stand

I couldn't find a nice phone stand on Thingiverse that fulfils these criteria:

prints as one piece
prints supportless / no supports needed
has different viewing angles (here: 60° and 45°)
leave space for a charging cable
looks ok (subjective)

This design is my attempt to solve this.

Printing Notes

Make sure that it's placed correctly on the side (the triangle shape lays parallel to the printing plane)
You shouldn't need support. The angle of the hooks that hold your phone are less steep than the recommend 45°. Some slicers might warn you about this, for example my PrusaSlicer did. But you can ignore the warning. The print should work fine.

Happy Printing!

Customisation

I included the OpenScad file if you want to remix the model or if you wanna customise for your phone. If you are new to OpenScad, it can render 3D-models from code. You can download the program here: https://openscad.org. Here are some ways for you to customise:

Viewing Angles

Change the viewing angle on the right a_r = 45 or on the left a_l = 65 to render a new stand model with different angles.

Hooks

If your phone doesn't fit in the hooks update the phone dimensions d_p = [69, 136, 11]. The value that matters most is the last one in the list: the depth/thickness of your phone (here 11mm). This works great with an iPhone12 mini. If you update make sure to encount for your phone case too and add some tolerance.

Charger Length

With l_c = 50, I added 50mm of extra space under the hook, so that the stand can hold your phone in portrait mode while the charging cable is plugged in. If you want a smaller, more compact version, you can reduce this. But careful, your cable might bend.

Overhang

If you are worried about your overhang not printing correctly without support, you can change the angle of overhang a_o = 30. Recommended is to use >45°, but in my experience 30° prints perfectly fine as well.