联想ThinkPad X1 Yoga立起式支架（V2）

Lenovo Thinkpad X1 Yoga Stand (V2)

2024-01-14 00:56:07

使用说明

所有模型资源均由用户上传分享，内容来源于网络公开资源
侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
模型将通过邮件发送（5分钟内自动发货），感谢理解带宽压力

关于费用

我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！

扫码手机访问

抖音私信 @jobsfan

Summary

This is a V2 redesign for a sturdier base and cleaner look. V1 had some issues with base connectors warping when pushing the laptop from one corner. Addons and holders are NOT compatible with the new, much bigger, connector used throughout.

Compatibility

Intended purpose

This holder is designed to hold a Thinkpad X1 Yoga (Gen5) when connected to a docking station. It allows the device to be used as an additional screen when in tablet mode rotation without wasting desk space for the keyboard in front and without having the camera bottom-up.

Docking Station

A Thinkpad USB-C Dock (Gen2) fits between both holder connectors at the bottom to provide a compact form and clean(er) desk.

Holder Angle

The device is fixed at a +-20° degree angle which should provide a good average for most desks and viewing angles. Do not hesitate to contact me for versions rotated to other angles.

Usage

Transporting

The connectors are easily removable for a compacter transport form. If keeping it on a desk, a drop of glue between connector and holder is recommended to prevent any risk of detachment when moving it around.

Extendability

All holders provide connectors on the inside and outside to reduce the number of pieces needed and to provide slots for extensions. This allows to connect cable holders, headset stands, ... on the outside triangle connectors of the holders.

→ Addon: Cableholder
This addon clips into the far-back outer connector and is wide/high enough to hold several cables such as HDMI + USB-C when the laptop has been removed from the stand. This prevents cables from laying around or sliding off your desk.

Print Settings

Printer brand:
Bambulabs
Printer:
Bambu X1C
Rafts:
No
Supports:
Yes
Resolution:
0,2
Infill:
10%
Filament brand:
Sunlu
Filament material:
PLA+
Notes:
Supports are strictly necessary for the holes.
Print 2 holders + 1 connector