3dsjs

模块化水培高架

Modular Hydroponics Tower

2024-01-14 01:39:19

使用说明

  1. 所有模型资源均由用户上传分享,内容来源于网络公开资源
  2. 侵权投诉:通过抖音私信 @jobsfan 联系我们(需附版权证明),24小时内处理
  3. 模型将通过邮件发送(5分钟内自动发货),感谢理解带宽压力
关于费用

我们是爱好者共建社区,为维持服务器成本,每个模型收取微量费用(仅覆盖基础开支)。我们承诺最低成本运营,感谢您的支持!

扫码手机访问
抖音私信 @jobsfan

Summary

This modular hydroponics tower lets you grow a large amount of plants without the need of lots of room. Each module fits 3 50mm (2 inch) pots and has the water tube running up the middle. Just stack as many modules as you require.

Each module is designed to fit 3 M3x4x5 heat-inserts and bolt together using M3 x 6mm bolts.

I designed this to fit on a small 3D printer, with a build area required of 170 x 170.

At the bottom of the stack you need the Base with a 16mm barb fitting and the optional base clamp (to clamp to the other side of a container lid) and attach it to a submersible pump.

At the top you push in the shower head and bolt on the lid. I drilled out the holes of the top module to 4.5mm to fit in 3 heat-inserts to make this secure but it does function fine without the lid bolted down.

Have fun growing!

Tags

License

CC BY-NC

Modular Hydroponics Tower
by ThatRobotGuy is licensed under the Creative Commons - Attribution - Non-Commercial license.

模块化水培高架
朋友,你觉得上面这个模型,属于下面的哪个分类?
必须全中文,且长度不超过15

相关内容

猜你喜欢