滴水尖端装置

TFV-18 Drip Tip Station

2024-01-14 03:34:43

使用说明

所有模型资源均由用户上传分享，内容来源于网络公开资源
侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
模型将通过邮件发送（5分钟内自动发送），感谢理解带宽压力，超过1小时没收到，请联系我们

关于费用

我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！

扫码手机访问

抖音私信 @jobsfan

Summary

This is a little station that holds the TFV-18 drip tips I designed. One model is just for the tips, the other includes a spot for my Geek Vape Aegis mod.

Layer Height - .2mm or .1mm for better quality on the top layers(maybe ironing as well?)
Infill - 15%
Walls - 4
Supports - No
Raft/Brim - No

Apologies for the model's pictures, I used some Makerbot translucent purple PLA that's about 9 years old(I have a lot and use it for firing off prototypes. It doesn't show the model off well. I may swap the photos once I print my final model and paint the lettering black(still debating on the color). I also didn't clean up the print afterwards since they're just junk prototypes. If printed slow at .1mm layer height you should get decent results.

This was printed on a CR10-SE @ 300mm/s past layer 2.
Bottom layers were at 100mm/s.