磁铁分隔与合并装置
Magnet separator/splitter and combiner
2024-05-05 22:37:27
使用说明
- 所有模型资源均由用户上传分享，内容来源于网络公开资源
- 侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
- 模型将通过邮件发送（5分钟内自动发货），感谢理解带宽压力
关于费用
我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！
扫码手机访问
抖音私信 @jobsfan
Summary
To separate the magnet easily without hurting your fingers and also combine them safely. Can separate small to medium sized magnet, but if the magnet is too thin, it maybe difficult to use.
To assembly it, you may need a pair of wrenches or pliers. The head of the screw and nuts is 20mm. Tighten the screw until it just moves freely.
Print Settings
- Printer:
N/A
- Rafts:Doesn't Matter
- Supports:Doesn't Matter
- Resolution:0.2
- Infill:25%
- Filament brand:
Doesn't Matter
- Filament color:
Doesn't Matter
- Filament material:
PLA
- Notes:
Print the cutter upside down so that no need to use supports.
The screw can be printed vertically. If you afraid that the screw will break, can increase the infill.
Tags
磁铁分隔与合并装置朋友，你觉得上面这个模型，属于下面的哪个分类？
必须全中文，且长度不超过15
相关内容
联系我们
邮箱: 289047960@qq.com
最新模型
-
为我的教学2024-05-08 -
康福特沃恩轮毂保护套2024-05-08 -
芯片夹2024-05-08 -
Mk2冷液泄漏散热器夹具2024-05-06
最热下载
-
通用型1/10比例底盘 - DKS基础款2023-03-26 -
Arduino或5V继电器控制板固定架2024-04-02 -
罗宾：不公正22024-04-07 -
厨房水槽滤网过滤器2025-06-05
